Adaptronic Select ECU - Mazda MX5 NA8C (3 plug) Adaptronic - 1 View larger

Adaptronic Select ECU - Mazda MX5 NA8C (3 plug)

eSel004B

New Product

This product is a plug-in ECU designed specifically for the NA8C model MX5 / Miata. It’s a direct plug-in to the factory wiring and allows you to expand the system to use all the features of the 440 ECU.

More Details

R 24,500 incl. VAT

Description

Standard ECU Features:

 

  • Built in MAP sensor to eliminate airflow meter

 

  • VE tuning to simplify injector upgrades

 

  • Easy to use software

 

  • Plugs into factory wiring

 

  • Compatible with many third party dashes and devices

 

  • Full closed loop operation

 

  • Flex fuel capable

 

  • Compatible with NA, turbo, supercharged and individual throttle applications

 

  • Spare output available for boost control if required

 

 

 

SPECIAL FEATURES:

  • This ECU also supports all the functions of the 440 ECU, however for advanced functions such as traction control, additional wiring and/or sensors will be necessary:

 

  • Flex fuel function (fuel composition sensor required) – fill it up with gas/petrol or any ethanol concentration

 

  • Adaptive fuel control (self tuning) – reduces dyno time

 

  • Traction control function

 

  • 4 ignition and 4 injector outputs, fully sequential operation (requires a wiring change for direct fire ignition – factory ignition system is wasted spark)

 

  • 7 or 8 auxiliary outputs with more control functions than you can point a stick at (eg 2 x closed loop VVT, boost control, idle control)

 

  • Launch control, antilag, flat shift and boost by gear all standard

 

  • Serial input for wideband O2 sensors (we recommend the MTXL)

 

  • Serial output for communication with dashes and dataloggers (we recommend the Race Technology units)

 

  • Inbuilt 4-bar MAP sensor

 

  • Headphone port for listening to the knock sensor while tuning

 

  • Basic closed loop ignition control

 

  • Closed loop fuel, idle, boost, 2 x variable valve timing control

 

  • Easy to use software

 

  • 8 programmable digital inputs

 

  • Dual maps

 

Specifications of the Mazda MX5 / Miata NA8C ECU

Attribute 
Physical
Connectors76-pin 4-plug connector (same as factory ECU but with additional 12 pin plug)
Mini USB port for connection to laptop
2x 2.5mm jacks for serial communications (one to connect to external loggers and dashes, the other to connector to slave devices such as wideband oxygen sensor controllers)
3.5mm headphone jack for listening to knock
Physical Dimensions (mm)205 x 147 x 33 mm (including mounting tabs)
Mass0.8 kg
Looms availableNone (use factory loom)
Sensor Interfaces
Crank angle sensor type3 programmable inputs, reluctor or hall-effect/optical, configurable as triggering ignition timing, injector drive, ignition timing during cranking, or cylinder 1 marker.
Capable of triggering off rising and/or falling edge on the same trigger input pin, internal pull-ups for hall-effect/optical trigger inputs
Crank angle trigger waveformsSync / trigger / multitooth / missing tooth (versatile programmability)
Nissan optical
Mitsubishi style with 2 sync pulses
Virtually all factory triggering systems
Vehicle speed inputs4 inputs – digital or reluctor
External Manifold Absolute Pressure (MAP) input0 – 5V, 2-point linear calibration, range 0 to 400 kPa (5V supplied by ECU)
There is also an internal 4 bar MAP sensor inside the ECU
Air, water and aux temp inputs4k7 pull-up (requires separate thermistor connected to ground), 32-point linearly interpolated calibration, range -30 to 125°C
EGO input0 – 1V factory narrowband, or Bosch “wideband” – input impedance 10 MOhm.
Can connect 0-5V linearised sensor (eg PLX, M&W UEGO) to aux input
Can connect 0-3V Zietronix sensor to analogue input
Can connect M&W UEGO, TechEdge, Innovate LC-1 and TC-4 on secondary serial port
Knock inputHigh impedance input, filtered
Throttle position (TPS) input0-5V (5V supplied by ECU), 2-point calibration
Auxiliary digital inputs8 inputs, each configurable as active-high or active-low, 12V tolerant inputs
Actuator Interfaces
Number of injector drivers4
Injector driver waveformsFull sequential
Batch
Semi-sequential every period or semi-sequential every second period
Half/third/quarter speed full sequential
Fire all at once every cylinder 1 (as on Swift GTi, Alpine Renault)
Optional batch fire during cranking
Injector driver currentOptional constant current or peak-hold drive, selectable steady-state current of 0.5A, 0.9A, 1.5A or 1.9A
Number ignition outputs4 (using 4th channel disables aux output 1)
Ignition output waveformsSelectable as firing on rising edge or falling edge
Ignition output typeOpen-collector with 560Ohm pull-up (allows direct connection to OEM transistor or separate igniter box)
Number of auxiliary outputs8 (or 7 if using 4 ignition channels)
High current outputsMax current 7A (or 3A inductive), 3 of these PWM capable, PWM frequency selectable (23Hz – 2kHz)
Low current outputsMax current 200mA – suitable to drive relay coils
Control Characteristics
Map points512 cells per fuel/ignition map, dual maps which can be toggled with digital input.
Load determination and Tuning ModesOptional Volumetric Efficiency Tuning
TPS or MAP based
TPS using 2nd map as MAP backup
MAP using 2nd map as TPS backup
Both maps MAP or TPS, digital input to select
MAP and TPS map, digital input to select
MAP and TPS map, use MAP on closed throttle, otherwise TPS
Use max/min/average/sum (MAP, TPS)
Read TPS from map and multiply by value in MAP table
Injector pulse width resolution0.7µs (0 – 44ms)
Ignition resolution0.2° (0 – 51°)
Dwell time resolution0.1ms (0.1ms – 5ms)
Dwell time reduction for high RPM with high dwell time
Accelerator pumpTPS and/or MAP based (configurable proportionality) as well as asynchronous accelerator pump.
Works with TPS pot or switch – pot gives better performance
Fuel control strategiesOpen loop, closed loop, and two adaptive modes (requires EGO sensor) – can run open loop above a specific MAP if required, target AFR can be set across rev and load ranges.
Flex Fuel capability (requires fuel composition sensor to be fitted).
Fuel correctionTrim tables based on Coolant Temperature and Air Temperature, Dead-Time correction
Ignition control strategiesTrim tables based on Coolant Temperature and Air Temperature
Idle control strategiesOpen loop values with a 32-entry temperature table
Target idle speeds with 32-entry temperature table
Idle effort correction for air temperature
Idle-up functionality based on A/C request, electrical loads, power steering
Can adjust ignition timing for closed loop idle control, as well as various types of idle control valves (2 wire, 3 wire, 6 wire stepper, and 4 wire stepper using an external driver available separately)
Main loop speed400 Hz (approx)

30 other products in the same category: